- CEP BEARING COMPANY
- Angular Contact Ball Bearings Cam Follower and Track Roller - Stud Type Cartridge Unit Bearings
English
- Address1-3-157 Kimachibori, Nishiku, Osakashi, Osaka 550-03, Japun
- Phone(Working Time)+81-6-6653-5001
- Phone(Nonworking Time)+81-6-6653-5001
Cylindrical Roller Bearings
Contact NowCylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are in:the number of roller rows (one, two or four)
the type of cage (with, without or special designs).Bearings with a cage can accommodate heavy radial loads, rapid accelerations and high speeds.Full complement bearings (without a cage) incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads at moderate speeds.
High-capacity cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with cage.
the configuration of the inner and outer ring flanges (position and number of guide flanges)
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|---|---|---|---|
| FAG NUP206-E-TVP2-C3 Cylindrical Roller Bearings | -20 °C | 32 mm | R1/8" | 34 mm |
| FAG NUP205-E-TVP2-C4 Cylindrical Roller Bearings | 3.7 Nm | 60 mm | 12 mm | 200 °C |
| FAG NUP205-E-TVP2-C3 Cylindrical Roller Bearings | CN | 1.4 kN | 10 mm | NTN |
| FAG NUP203-E-M1A Cylindrical Roller Bearings | -20 °C | 50.8 mm | 29.2 kN | 86 mm |
| FAG NUP204-E-TVP2-C3 Cylindrical Roller Bearings | T207N- | 37 mm | 3.97 mm | 31.75 mm |
| FAG NJ316-E-M1-C4 Cylindrical Roller Bearings | 10 mm | 19 mm | 51.6 mm | 23.7 kN |
| FAG NJ315-E-TVP2-C4 Cylindrical Roller Bearings | 6.65 kN | 3.7 Nm | 17 mm | 100 °C |
| FAG NJ316-E-M1-C3 Cylindrical Roller Bearings | 16mm | M6x1 | 42.6 mm | 28 mm |
| FAG NJ316-E-M1 Cylindrical Roller Bearings | 10 mm | 37 mm | 28 mm | -20 °C |
| FAG NJ315-E-TVP2-C3 Cylindrical Roller Bearings | 110 mm | 100 °C | 19mm | 30 mm |
| FAG NJ315-E-M1-F1-T51F Cylindrical Roller Bearings | 6.5 mm | 3.7 Nm | M6x1 | 4.78 kN |
| FAG NJ315-E-M1-F1-C4 Cylindrical Roller Bearings | 31.85 kN | 100 °C | 60 mm | 2.46 kg |